重工机械网>蝶阀网>技术文章

截止阀标准汇总

2009年09月09日 15:43:59来源:浙江三精阀门有限公司作者:永嘉县三精阀门有限公司关键词:
截止阀标准汇总
发布日期:2008-7-31            浏览数:332

截止阀标准汇总



标准编号
标准中文名称
标准英文名称
DL/T531-1994(2005复审)
电站高温高压截止阀、闸阀技术条件
 
GB/T11689-1989
船用法兰铸钢截止阀(四进位)
Marine cast steel flanged stop valves
GB/T12235-1989
通用阀门法兰连接钢制截止阀和升降式止回阀
General purpose industrial valves—Flanged steel globe valves and lift check valves
GB/T12233-1989
通用阀门铁制截止阀与升降式止回阀
General purpose industrial valves—Casting iron globe valves and lift check valves
GB/T1951-1984
船用低压外螺纹青铜截止阀
Marine low pressure bronze male threaded stop valves
GB/T2499-1993
船用法兰铸铁双排截止阀
Marine cast iron flange dual-row stop valves-case
GB/T590-1993
船用法兰铸铁截止阀
Marine cast iron flanged stop valves
GB/T594-1983
船用外螺纹锻钢截止阀
Marine forged steel male thread stop valves
GB/T584-1999
船用法兰铸钢截止阀
Marine cast steel flanged stop valves
GB/T595-1983
船用外螺纹青铜截止阀
Marine bronze male thread stop valves
GB/T587-1993
船用法兰青铜截止阀
Marine bronze flanged stop valves
JB/T7245-1994
制冷装置用截止阀
 
JB/T7747-1995
针形截止阀
 
JB/T9081-1999
空气分离设备用低温截止阀和节流阀技术条件
 
JB/T53165-1999
高压平衡截止阀 产品质量分等
 
JB/T53174-1999
截止阀 产品质量分等
 
JB/T53155-1999
空气分离设备用低温截止阀和节流阀 产品质量分等
 
JB/T8859-2004
截止阀 静压寿命试验规程
 
HG/T3215-1986
聚三氟氯乙烯塑料衬里截止阀
 
NF E29-350-2003
工业用阀.钢制球阀、球状截止阀和止回阀
(Industrial valves - Steel globe and globe stop and check valves.)
NF P43-001-2000
建筑物用阀门.建筑物中供应引用水用铜合金截止阀.试验和要求
(Building valves - Copper alloy stopvalves for potable water supply in buildings - Tests and requirements.)
NF D36-380-2001
燃气燃烧器和燃气用具用自动截止阀的阀门检验系统
(Valve proving systems for automatic shut-off valves for gas burners and gas appliances.)
NF A84-621-2002
气焊设备.焊接、切割和相关工艺用带截止阀的速动连接
(Gas welding equipment - Quick-action coupling with shut-off valves for welding, cutting and allied processes.)
NF M88-771-1975
液化烃容器装置.手动截止阀.制造.功能.试验
(LIQUEFIED HYDROCARBON INSTALLATIONS IN CONTAINERS. MANUALLY CONTROLLED STOP VALVE. CONSTRUCTION. OPERATION. TESTS.)
NF P43-002-1981
建筑物水管阀门.水表截止阀.一般技术规范
(VALVES AND TAPS FOR WATER SUPPLY IN BUILDINGS. STOP VALVES FOR METER. GENERAL TECHNICAL SPECIFICATIONS.)

BS EN 13709-2003
工业用阀.钢制球阀、球状截止阀和止回阀
(Industrial valves - Steel globe and globe stop and check valves)
BS 1552-1995
一类、二类和三类燃气用手动截止阀规范
(Specification for open bottomed taper plug valves for 1st, 2nd and 3rd family gases up to 200 mbar)
BS 7461-1991
带有流量调节器、闭路开关指示、闭合位置指示器开关或气流量控制的电动自动气体截止阀规范
(Specification for electrically operated automatic gas shut-off valves fitted with throughput adjusters, proof of closure switches, closed position indicator switches or gas flow control)
BS 1010-2-1973
给排水设施用排放旋塞和截止(旋压式)阀规范.第2部分:排放旋塞和地面上用截止阀
(Specification for draw-off taps and stopvalves for water services (screw-down pattern) - Draw-off taps and above-ground stopvalves)
BS 1873-1975
石油、石油化学及有关工业用钢球形阀、球形截止阀与单向阀(有法兰及对接焊端)规范
(Specification for steel globe and globe stop and check valves (flanged and butt-welding ends) for the petroleum, petrochemical and allied industries)
BS 3457-1973
水与截止阀座垫圈材料规范
(Specification for materials for water tap and stopvalve seat washers)
DIN 4817-1-1981
液态气的截止阀.概念.安全技术要求.检验.标志
(Shut off valves for liquefied gases; definitions, requirement, testing, marking)
DIN 86251-1998
造船用铸铁制带法兰的DN15至500的截止阀
(Shutt off valves for shipboard use, of cast iron, with flanges, DN 15 to 500)
DIN 86260-1998
造船用炮铜制带法兰DN15至500的截止阀
(Shutt off valves for shipboard use, of gun metall, with flanges, DN 15 to 500)
DIN 85003-4-1997
造船用管件的交货技术条件.第4部分:截止阀
(Technical specifications for valves for shipboard use - Part 4: Stop valves)
DIN 85003-6-1997
造船用管件的交货技术条件.第6部分:手动截止阀
(Technical specifications for valves for shipboard use -Part 6: Hand operated gate valves)
DIN 3399-1986
低压截止阀.安全技术要求和检验
(Gas low-pressure cut-off valves; safety requirements, testing)
DIN 3160-1974
公称压力25的冷却剂循环直通截止阀
(Through-valves for refrigerant circuits, nominal pressure 25 bar)
DIN 3161-1974
公称压力25的冷却剂循环角形截止阀
(Elbow valves for refrigerant circuits; nominal pressure 25 bar)
DIN 4056-1992
水管.街道地下截止阀门的路盖.DVGW技术规范
(Water pipelines; valve boxes for stop valves; DVGW code of practice)
DIN EN 1643-2001
燃气燃烧器和燃气用具用自动截止阀的阀门检验系统
(Valve proving systems for automatic shut-off valves for gas burners and gas appliances; German version EN 1643:2000)
DIN 86500-1968
船用螺纹连接的截止阀和闸阀等概述
(Valves and Gate Valves with Screwed Connections; Survey of Types for Shipbuilding)
DIN 86254-2000
船只及造船技术.超轻型截止阀DN32-DN125(PN10)
(Ships and marine technology - Shut off valves extra light duty DN 32 to DN 125, PN 10)
DIN EN 13709-2003
工业用阀.钢制球阀、球状截止阀和止回阀
(Industrial valves - Steel globe and globe stop and check valves; German version EN 13709:2002)
DIN EN 1213-1999
建筑阀门.建筑物中饮用水供应用铜合金截止阀.试验和要求
(Building valves - Copper alloy stopvalves for potable water supply in buildings - Tests and requirements; German version EN 1213:1999)
DIN 86266-2002
船舶和航海技术.用手夹紧和法兰连接的超轻型法兰的截止阀
(Ships and marine technology - Butterfly valves for flanges extra light duty wafer type and flanged type - DN 50 to DN 125, PN 10)
GB/T1856-1993
船用法兰铸铁单排排出截止阀
Marine flanged cast iron single arrangement exhaust stop box valve
GB/T1854-1993
船用法兰铸铁单排吸入截止阀
Marine flanged cast iron single arrangement suction stop box valve
JIS B8605-2002
致冷装置的截止阀
(Stop valves for refrigerants)
JIS F7379-1996
造船.卡套式30K黄铜截止阀
(Shipbuilding -- Brass 30K stop valves with bite joint(s))
JIS E4103-1988
铁路车辆用截止阀
(Cut-out cocks for railway rolling stock)
JIS E4114-1989
铁路车辆用青铜截止阀
(Bronze stop valves for railway rolling stock)
QB/T3880-1999
卫生洁具、暖气直角式截止阀技术条件
Technical requirements for sanitariness ware and heating angle valve
QB/T3881-1999
卫生洁具、暖气直角式截止阀型式和尺寸
Shapes and dimensions of sanitariness ware and heating angle valve
JB/T10530-2005
氧气用截止阀
 
  • 凡本网注明“来源:重工机械网”的所有作品,均为浙江兴旺宝明通网络有限公司-重工机械网合法拥有版权或有权使用的作品。刊用本网站稿件,需经书面授权。未经本网授权不得转载、摘编或利用其它方式使用上述作品。已经本网授权使用作品的,应在授权范围内使用,并注明“来源:机床商务网”。违反上述声明者,本网将追究其相关法律责任。
  • 本网转载并注明自其它来源(非重工机械网)的作品,目的在于传递更多信息,并不代表本网赞同其观点或对其真实性负责,不承担此类作品侵权行为的直接责任及连带责任。其他媒体、网站或个人从本网转载时,必须保留本网注明的作品第一来源,并自负版权等法律责任。
  • 如涉及作品内容、版权等问题,请在作品发表之日起30日内与本网联系,并提供真实、有效的书面证明。我们将在核实后做出妥善处理。

热门频道